虚拟机克隆后eth0网卡变成eth1网卡并且IP地址消失问题解决(3)

# This file was automatically generated by the /lib/udev/write_net_rules

# program, run by the persistent-net-generator.rules rules file.

#

# You can modify it, as long as you keep each rule on a single

# line, and change only the value of the NAME= key.

# PCI device 0x8086:0x100f (e1000)

#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:5e:35:00", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:3a:f2:8e", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

DEVICE="eth0"

HWADDR="00:0C:29:3a:f2:8e"

NM_CONTROLLED="yes"

ONBOOT="yes"

IPADDR=192.168.1.230

NETWORK=192.168.1.0

NETMAST=255.255.255.0

TYPE="Ethernet"

UUID="b1b9ac33-19ad-4bb3-ac6c-06d5a3fa7c5b"

eth0 Link encap:Ethernet HWaddr 00:0C:29:3A:F2:8E

inet addr:192.168.1.230 Bcast:192.168.1.255 Mask:255.255.255.0

inet6 addr: fe80::20c:29ff:fe3a:f28e/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:380 errors:0 dropped:0 overruns:0 frame:0

TX packets:402 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:35506 (34.6 KiB) TX bytes:54463 (53.1 KiB)

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)